Podcast Pre-Launch Checklist Before You Hit Publish

QuickReel Team avatar
QuickReel Team21st November, 2026
A clipboard checklist beside a podcast microphone and laptop showing a publish button, with several items ticked

Before you hit publish, run five checks in order: validate your RSS feed, confirm your artwork meets the 1400–3000 px square spec, fill every required metadata tag, publish a trailer so directories have something to read, then submit to Apple, Spotify, and YouTube. Each gate catches a different failure that only shows up after launch, when it's expensive to fix.

The trap with launching a podcast is that almost everything looks fine in your hosting dashboard. You uploaded the file, the artwork's there, the title reads right. Then a week later a friend says "I can't find you on Apple," and you discover your feed has been silently rejected because of one missing tag. That's the whole reason this checklist exists: to catch what breaks downstream, where you can't see it, while you still can.

This is a go/no-go gate, not a brainstorm. If a gate fails, you stop and fix it, you don't publish and hope. Work through them in the order below, because the later gates depend on the earlier ones passing.

Why a last gate matters more than a longer to-do list

You've probably seen the publishing-checklist articles that list forty things. Most of them are pre-production work you already did, picked a name, recorded an episode, wrote show notes. A launch gate is different. It assumes the creative work is done and asks one question per item: will this break after I publish, where I can't see it?

That framing matters because the failure mode for new podcasts isn't a bad first episode. It's never getting a second listener because the show isn't actually findable, then losing momentum. Nearly half of all podcasts never make it past the first three episodes Amplifi Media, and a chunk of those early quits trace back to a launch that quietly didn't land, no directory listing, no discovery, no reason to keep going. A clean launch won't make a show survive on its own, but a broken one removes the chance.

The five pre-launch gates, in order Gate 1 feed validates, gate 2 artwork passes spec, gate 3 metadata complete, gate 4 trailer live, gate 5 directories submitted. Each depends on the one before it. Five gates, and they break in this order 1. Feed validates clean 2. Artwork meets spec 3. Metadata all required tags 4. Trailer live in feed 5. submit Each gate depends on the one before it: no trailer, nothing to submit; bad feed, the trailer never reads.
The five gates, in the order they break. Source: QuickReel launch checklist.
Illustration depicting The Pre-Launch Checklist Before You Hit Publish

Gate 1: Does your RSS feed validate clean?

Run your feed through a podcast validator before you do anything else. A feed that loads in your dashboard can still fail the directories' parser over a single unescaped character, a wrong date format, or a missing tag, and the rejection arrives days later, after you've already announced. Validate first; fix before you submit.

Your RSS feed is the one file every directory reads. You don't upload to Apple or Spotify directly, you give them your feed URL once, and they pull from it forever (Spotify for Creators). So a flaw in the feed isn't a cosmetic issue; it's the thing that decides whether you exist on the platform at all.

Three failures cause most rejections, and none of them are visible in a normal preview:

  • Unescaped characters. An ampersand in your show title or category has to be written as & in the XML. "Society & Culture" as a raw & will fail the parser. Quotes and special characters need encoding too.
  • Wrong date format. Episode publish dates must use RFC 2822 format, Fri, 21 Nov 2025 09:00:00 -0500, not 2025-11-21. Your host usually handles this, but custom or imported feeds slip.
  • A broken or missing enclosure. Every episode needs an tag with a working URL, a correct file size, and the right MIME type (audio/mpeg for MP3). A broken enclosure means the player can't fetch the audio and rejects the item.

Apple's own guidance is to test your feed before submitting it for review (Apple Podcasts for Creators). Worth stating plainly: the initial submission check is shallow, it catches XML structure errors, not every content problem, so a feed can pass the upload and still misbehave once a human reviews it. Validating yourself is the only way to find those.

Go/no-go: feed validates with zero errors → go. Any error → stop and fix.

Gate 2: Does your artwork pass the actual spec?

Cover-art rejection is a common reason Apple bounces a new show, so treat this as a hard pass/fail. Apple's published spec: a square (1:1) image between 1400×1400 and 3000×3000 pixels, in JPEG or PNG, with no transparency or alpha channel (Apple Podcasts for Creators). Two more things that aren't on that template but bite anyway: export in RGB color space (CMYK files render with washed-out color in apps), and keep the file reasonably small so it loads fast on mobile. Submit at 3000×3000, it's the maximum every major platform accepts and it survives high-density phone screens.

The podcast artwork spec, with Apple's rules and two practical add-ons Square 1:1 aspect, 1400 to 3000 pixels, JPG or PNG with no transparency per Apple; plus export RGB and keep the file small as practical add-ons. Artwork: what to check before you submit Apple: 1400×1400 min, 3000×3000 max, perfect 1:1 square Apple: JPEG or PNG, no transparency / no alpha channel Practical: export RGB, not CMYK (CMYK renders washed out) Practical: keep the file small so it loads fast on mobile Source: Apple Podcasts for Creators, Show Cover template (top two rows).
Apple's published artwork rules, plus two checks that aren't in the template but still matter. Source: Apple Podcasts for Creators.

Two things that pass validation but still hurt you downstream. First, legibility at thumbnail size. Your cover gets seen at roughly 120 pixels in a list view, not at 3000. If the title isn't readable when you shrink it to the size of a fingernail, it's not done, design it once at full size, then squint-test it small. Second, the bottom 15%: Apple overlays a progress indicator there, so keep faces, logos, and text out of that band. The full breakdown lives in our podcast cover art requirements guide.

Go/no-go: square, RGB, 1400–3000 px, JPEG or PNG with no transparency, legible at thumbnail size → go.

Illustration for 'Gate 3: Is every required metadata tag filled?'

Gate 3: Is every required metadata tag filled?

Walk every required tag and confirm it's present and correct, a single missing field gets the whole feed rejected. The required show-level tags are </code>, <code><description></code>, <code><link></code>, <code><language></code> (a real ISO value like <code>en-us</code>), <code><itunes:author></code>, <code><itunes:category></code> (matching an official category exactly), <code><itunes:image></code>, an <code><itunes:owner></code> block with name and email, and <code><itunes:explicit></code> set to <code>true</code> or <code>false</code>.</p> <p>That last one trips more new shows than any other. <strong>The explicit tag must be present even if your show is clean</strong>, leaving it out entirely causes rejection. "No explicit content" is not the same as "no tag." Set it to <code>false</code> and move on.</p> <p>A few that don't reject the feed but quietly cost you:</p> <ol><li><strong>The owner email.</strong> Apple uses it to verify ownership of the feed. Get it wrong and you can't claim your show or transfer hosts later.</li><li><strong>Category accuracy.</strong> Your <code><itunes:category></code> decides where you show up in browse. Pick the one your audience actually searches, not the one that sounds prestigious. Our <a href="/blog/choose-podcast-hosting">choosing podcast hosting</a> guide covers where these fields live in each platform.</li><li><strong>Episode-level basics.</strong> Each episode needs a permanent <code><guid></code> (never change it, changing a GUID creates a duplicate episode and breaks subscriber tracking), a valid <code><pubDate></code>, and a title. The audio file's own <a href="/blog/podcast-id3-tags-guide">ID3 tags</a> carry the title and artwork into apps that read the file directly, so set those too.</li></ol> <p>Your description does double duty as discovery copy and as the text directories index, so write it as a real pitch, not a placeholder. The same care you'd put into show notes that get read applies here.</p> <aside class="qr-cta"> <strong>Want this as a one-page PDF?</strong> Grab the free <strong>Podcast Pre-Launch Checklist</strong>, all five gates, every required tag, and the artwork spec on a single printable sheet you can tick off before you publish. Drop your email and we'll send it over, plus a short kit on turning your first episodes into clips that help new listeners find you on <a href="https://quickreel.io">QuickReel</a>. </aside> <h2>Gate 4: Is a trailer (or first episode) live in the feed?</h2> <p>Most directories won't accept a feed with no published episodes, so you need at least one item live before you can submit, and a trailer is the smart choice. A trailer is a short promo episode, usually 30 seconds to about 5 minutes, that previews your show (<a href="https://transistor.fm/trailer/">Transistor</a>). Publishing it well before launch lets you submit to every app and start collecting subscribers ahead of episode one.</p> <p>Set its episode type to "Trailer" in your host, not "Full." This isn't cosmetic. On Apple Podcasts and Spotify, trailers get pinned to the top of your show page, above the episode list, prime real estate that a regular episode doesn't get (<a href="https://support.spotify.com/us/creators/article/trailers/">Spotify for Creators</a>). Mislabel it as a full episode and you lose that placement.</p> <p>One honest caveat: not every player treats trailers specially. Overcast and YouTube Music drop them into the normal chronological feed with no highlighting. So the trailer earns its keep on the two biggest apps, and quietly sits in line everywhere else. That's still a net win for launch, you have something to submit, and your two largest audiences see a clear "start here."</p> <p><strong>Go/no-go:</strong> at least one episode (ideally a trailer, typed correctly) is published and appears in the live feed → go.</p> <figure class="incontent"> <img src="https://cdn.quickreel.io/fe-assets/blog/blog-images/podcast-pre-launch-checklist-in3.webp" alt="Illustration for 'Gate 5: Have you submitted to the directories, in the right order?'"> </figure> <h2>Gate 5: Have you submitted to the directories, in the right order?</h2> <p>Submit your feed URL to the major directories now, while you're at the desk and the feed is fresh in your head. You submit the feed once per directory; after approval, every new episode appears automatically as the platforms re-check your feed (Apple polls roughly every 24 hours). The catch is the approval timelines differ enough that order matters.</p> <figure> <svg viewBox="0 0 640 230" width="100%" height="auto" role="img" aria-label="Directory approval times: Spotify under one day, Amazon Music one to three days, Apple three to five days" preserveAspectRatio="xMidYMid meet" font-family="Geist, Inter, system-ui, sans-serif"> <title>Directory approval times after you submit Spotify approves in minutes to a day, Amazon Music in one to three days, Apple typically in three to five working days. How long each directory takes to approve Spotifyminutes–1 day YouTube~1 day (RSS import) Amazon Music1–3 days Apple Podcasts3–5 working days (manual) Apple/Spotify per The Podcast Host; Amazon and YouTube are typical observed ranges.

Submit to the slowest one first so it isn't your launch-day bottleneck. Apple and Spotify times per The Podcast Host; Amazon Music and YouTube are typical observed ranges.

Spotify usually approves within minutes to a day. Apple reviews every new show manually, so the standard wait is 3–5 working days, and it runs longer around the winter holidays, when the queue backs up (The Podcast Host). Some hosts with native Apple integration cut that to around 24 hours by handling the handshake for you. YouTube and Amazon Music typically land in between, usually within a few days.

The practical rule: submit to Apple first, because it's the slowest, then knock out Spotify, YouTube, and Amazon while Apple's queue runs. If you submit Apple last, you wait an extra week for no reason. This is also why the trailer in Gate 4 should go up well before your real launch date, you want the approvals done and the listings live before episode one drops, not scrambling on launch morning.

Go/no-go: feed submitted to Apple, Spotify, YouTube, and Amazon Music; Apple submitted first → go. Now you can publish episode one.

Common mistakes that survive every other check

These pass the gates above but bite later. Worth a deliberate look before you call it done.

  • Publishing episode one before approvals land. You announce on social, listeners search Apple, your show isn't there yet because it's still in manual review. Fix: get the trailer approved and listed first, then publish and announce.
  • Treating the description as filler. It's both your pitch and the text directories index for search. A vague paragraph means nobody finds you by topic. Write it like ad copy.
  • A cover that's gorgeous at full size and unreadable small. It passes validation and fails in the wild, where it's a 120-pixel thumbnail. Squint-test it.
  • Changing a GUID after the fact. Editing an episode's GUID to "clean it up" spawns a duplicate and breaks subscriber tracking. Once it's published, never touch it.
  • No fallback contact. Use a real, monitored owner email. It's how you recover the feed, switch hosts, or claim the show on a new platform.

What to do once you're live

Approvals in, episodes publishing, the launch checklist is done, and the growth work starts. The fastest way new listeners find a new show is short video clips: a 30–90 second moment from your episode, captioned, posted where people already scroll. Clips drive an estimated 20–40% of new audience for video shows (Podcast Studio Glasgow). For the full from-zero path, the start-a-podcast-for-free guide and the step-by-step launch plan pick up where this checklist leaves off.

FAQ

What should I check right before publishing a podcast? Five things, in order: your RSS feed validates with no errors, your artwork is a square RGB JPEG or PNG between 1400 and 3000 pixels, every required metadata tag is filled (including itunes:explicit), a trailer or first episode is live in the feed, and you've submitted to Apple, Spotify, YouTube, and Amazon Music.

Why does my podcast feed get rejected? Most rejections come from one of three feed issues, an unescaped special character like a raw ampersand, a wrong date format, or a broken episode enclosure, or from artwork that misses the spec. Cover art is the most common cause of Apple rejections specifically, per Apple's own guidance.

Do I need a trailer before I launch? Practically, yes. Most directories won't accept a feed with no episodes, and a trailer is the lowest-effort way to satisfy that while building subscribers early. On Apple and Spotify, a correctly typed trailer also pins to the top of your show page.

How long until my podcast appears in Apple Podcasts? Usually 3–5 working days, since Apple reviews new shows manually, and longer around the winter holidays when the review queue backs up (The Podcast Host). Some hosts with native Apple integration shorten this to roughly 24 hours.

Can I fix metadata after I publish? Most fields, yes, your host pushes updates and directories re-read the feed within about a day. The exception is an episode's GUID: never change it after publishing, because it creates a duplicate episode and breaks subscriber counts.